SKU: N/AThis site contains affiliate links for which we may be compensated
Consumer Electronics / Vehicle Electronics & GPS / Car Audio / Car Amplifiers
50 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms)
150 watts x 2 bridged at 4 ohms
CEA-2006 compliant
Class D amp technology
conformal-coated circuit board — suitable for power sports and marine applications
variable high- and low-pass filters (50-200 Hz, 12 dB/octave)
preamp and speaker-level inputs
fuse rating: 30A x 1
10-gauge power and ground leads recommended — wiring and hardware not included with amplifier
dimensions: 7-5/8"W x 1-13/16"H x 3-7/8"D
warranty: 1 year
What's in the box
4-Channel amplifier with a 30A ATM mini-fuse installed
9" Speaker output harness (8-pin Molex plug on one end)
4 Self-tapping screws (M4 x 16mm)
Two 13.5" plastic wire ties
Clear plastic self-adhesive Protective Covers for Controls (2 sheets)
Instruction Manual/Warranty Card
About this item Written by Crutchfield's Buck Pomerantz Power your music wherever you go Kenwood's KAC-M3004 compact 4-channel amplifier will power up the music in your vehicle with 50 watts RMS per channel. That's enough to hear everything clearly above the noise of the road, trail, or waterway as you travel along. This little powerhouse will fit almost anywhere, including a storage compartment on a boat, motorcycle, or ATV, so you can install great sound in whatever vehicle you wish. Installing a pair of subs? You can bridge this amp to 2-channel mode and send 150 watts to each subwoofer. Weather-resistant protection for music on the go Conformal coating protects the internal circuits from water and dirt, so the show will always go on, even through the roughest conditions. The speaker output terminals feature plastic-covered plugs that provide further protection for those connections. High-level inputs ease installation The KAC-M3004 will accept a signal from just about any source, whether you're using RCA cables from an aftermarket receiver or speaker wires from a factory radio. When you use the speaker-level inputs, the amplifier will sense the signal and turn itself on, so you won't need to run a remote turn-on lead to your car stereo.
Returns Accepted for this item if it's within 60 Days